You are here: Individual Product
Maxi Cup Drinker
The Maxi Cup Drinker can be readily fitted at any chosen height, and any number can be fitted to any type of water container.
Please be aware as the float inside is only small the volume of water above the drinker shouldn't be to great as this will effect it's performance
To fit, simply drill a ½"/12mm hole into the side of the drum and insert the drinker into the hole, then fasten with locking nut and filter.
The Maxi Cup Drinker is a simple, easy to use, low cost, all round drinker system that does not require the use of pipe work or header tanks.
Including V.A.T. @ 20%: £10.75